Enjet Turbine Accessory Mounts

2 Produkte

  • Enjet Turbine Pump 90 Degree Mount Black Enjet Turbine Pump 90 Degree Mount Gray

    Enjet Turbine Pump 90 Degree Mount

    Enjet RC Turbine Fuel Pump 90-Degree Side Mount Optimize your fuselage layout and route your fuel lines cleanly with this custom-engineered 90-Degree Side Mount for the Enjet RC Turbine Fuel Pump. Designed for tight jet interiors where vertical clearance or tubing angles matter most, this upright cradle positions your pump perpendicularly to the mounting tray—keeping fuel nipples accessible and power leads clear. Key Features Space-Saving 90-Degree Orientation: Holds the Enjet fuel pump upright for vertical fuel line routing and cleaner plumbing in compact turbine fuselages. Rigid Bolt-In Security: Side-clamping hardware locks the pump chassis firmly into the bracket, preventing shifting or vibration under high-G flight loads. Fuel- & Heat-Resistant PETG: 3D printed in high-strength PETG to withstand turbine bay temperatures, impact, and direct exposure to kerosene, diesel, and turbine oils. Four-Point Flanged Base: Pre-drilled mounting tabs ensure a rock-solid, flush installation onto plywood equipment trays or composite formers. Color-Matched to Your Build: Available in Black, Gray, Red, Orange, Lime Green, and Blue to coordinate with your jet’s interior. What’s Included 1x PETG Enjet Turbine Pump 90-Degree Side Mount Pump Attachment Screws Airframe Mounting Screws

    $4.50

  • Enjet Turbine ECU Mount Assembly Black Enjet Turbine ECU Surface Mount Black

    Enjet ECU and Telemetry Surface Mount

    Enjet RC Turbine ECU V3+ & Telemetry Module Surface Mount Bundle Keep your turbine electronics locked down and your airframe installation clean with this complete, custom-fitted mounting system for the Enjet ECU V3+ and Enjet Telemetry Module. Built to handle high-G maneuvers and harsh turbine environments, this bundle replaces messy Velcro and zip-ties with a rigid, bolted-in solution. Both precision-molded cradles feature top retaining bars secured by socket-head cap screws, clamping your electronics firmly in place while allowing quick removal for maintenance or transfers between airframes. The telemetry mount offers dual-installation versatility: bolt it directly to any flat surface in your fuselage, or use the included 90-degree adapter bracket to piggyback it directly onto the ECU mount for a compact, all-in-one footprint. Strategic cutouts across both trays ensure 100% unobstructed access to all status LEDs, power connectors, pump/starter leads, and data ports. Key Features Complete Electronics Solution: Includes custom-fitted cradles for both the Enjet ECU V3+ and Enjet Telemetry Module, with full access to all ports, wiring harnesses, and indicator lights (LOG, READY, ERR, RUN, and DTA). Flexible 2-in-1 Telemetry Mounting: Install the telemetry tray independently on any flat airframe surface, or attach it directly to the side of the ECU mount using the included 90-degree bracket to save valuable fuselage space. Secure Clamping Design: Top retention bars with socket-head cap screws lock both units down tight against vibration and high-G flight loads. Durable PETG Construction: 3D printed in high-strength PETG for superior heat resistance, impact durability, and chemical resistance against turbine fuels and oils. Easy Airframe Installation: Pre-drilled, countersunk base holes make mounting to plywood trays or composite fuselages fast and flush. Color-Matched to Your Build: Available in Black, Gray, Red, Orange, Lime Green, and Blue to match your jet’s interior scheme. What’s Included 1x PETG ECU V3+ Surface Mount Base with 2x Top Retention Rails & Clamping Screws 1x PETG Telemetry Module Surface Mount Base with 1x Top Retention Bar & Clamping Screws 1x PETG 90-Degree ECU-to-Telemetry Adapter Bracket with Hardware Airframe Mounting Screws

    $11.75

Enjet Turbine Accessory Mounts

Enjet RC Turbine Mounting Solutions

Keep your turbine electronics locked down, organized, and easily serviceable with our precision-engineered mounting hardware designed specifically for Enjet turbine systems. Built to eliminate messy Velcro, zip-ties, and loose wiring harnesses, our rigid bolt-in cradles protect your critical flight components against high-G maneuvers, airframe vibration, and harsh turbine environments.

Every mount is 3D printed in high-strength PETG for superior heat, impact, and chemical resistance against jet fuels and oils. Featuring secure top-clamping retention rails and unobstructed cutouts for status LEDs, power leads, and data ports, our modular mounting solutions give your jet a clean, professional, and reliable installation. Available in six colors to match your build.

© 2026 Approach RC Concepts, Powered by Shopify

  • US (USD $) US (USD $)
  • Deutsch - Fahne Deutsch - Fahne
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa